“I needed to rewire an unknown amount of 1930s-era knob and tube wiring in an old house; it was a daunting project and ended up being most of the house. They were willing to move ahead one day at a time…”
E
Erik S.Knob & tube rewire
Electrical Wiring Installation
New construction, renovations, rewiring and new circuits
Building, renovating, finishing a basement or replacing old wiring? We wire it properly the first time, with connections built to last.
- Every outlet pigtailed, so one failure doesn’t take out the circuit
- Permits pulled and work done to code
- Clean job sites and itemized invoices
Licensed, bonded & insured
Fully covered on every job, big or small.
Permits handled
We pull the permits and coordinate with the power company for you.
Red Seal electrician
Work led by a Red Seal electrician and done to code.
Locally owned since 2015
A business built on repeat clients and referrals.
Wiring done right, behind the walls
Most wiring ends up hidden behind drywall for decades. That’s why we take the time to do it properly.
We wire new homes and buildings, renovations and basement developments, and replace old wiring in older homes. We also add the circuits a modern home needs: EV chargers, hot tubs, heat pumps, stoves and dryers.
Connections built to last
A lot of wiring uses each outlet to carry power on to the next one. If one outlet fails, everything after it can stop working. We pigtail the connections inside every box, so power doesn’t depend on the device. If an outlet fails, the rest of the circuit keeps working.
What we wire
- New homes, shops and buildings
- Renovations and basement developments
- Knob and tube and aluminum wiring
- New and moved outlets and switches
- Stove, dryer, A/C and heat pump circuits
- Electric car chargers
- Hot tubs
- Data and network cabling
Adding a big load? We check whether your panel can handle it first. If it can’t, we can upgrade the panel as part of the same job. Building a shop or garage? See shop, quonset and outbuilding wiring.
What we handle
Wiring for every stage of a project
From the first wire in a new build to replacing wiring that’s been in an old house since the 1930s.
General construction
Complete wiring for new homes, shops and buildings, from rough-in to finish.
Remodeling
Renovations, kitchens and basement developments, planned with you.
Knob & tube and aluminum rewiring
Replacing or updating old wiring that insurers and inspectors flag.
Electrical outlet & switch installation
New, moved and repaired outlets, switches, dimmers and smart switches.
Appliance & heat pump circuits
Dedicated circuits for stoves, dryers, air conditioners and heat pumps.
Electric car charger installation
A dedicated circuit and charger in your garage or driveway.
Data & network cabling
Network cabling for homes, offices and shops.
Hot tub wiring
The circuit and disconnect your hot tub needs, done to code.
Our process
How it works
No surprises. You’ll know what the job involves, what it costs and when it’s happening before we start.
Call us
Call during business hours, or send a text, email or the form. We call back within 2 hours on weekdays.
We take a look
Tell us what you’re trying to do. We’ll decide together whether it needs a site visit or a quick video walkthrough.
Free estimate
We can usually give you a ballpark the same day. A full written quote on paper takes about a week.
We do the work
We book a time, pull the permits, get it done to code and send a clear, itemized invoice.
Reviews
What our clients say
A few words from people we’ve done this kind of work for.
5.0
“They’re super friendly and really know their stuff. Since we have aluminum wiring in our home, Gaetan took the time to explain what that means for us and suggested the best hardware to be used with our electrical…”
C
Cali M.Aluminum wiring
“Punctual in keeping appointments, easy to communicate with, offering sound advice, and very transparent and detailed in invoicing. I can highly recommend CL Electric for all your electrical needs.”
P
Peter K.Basement development
“These guys came and wired up our hot tub up to code, within days of contacting might I add. They were extremely punctual with responding, extremely knowledgeable and they cleaned up after themselves which is every mom’s dream.”
K
Kera S.Hot tub wiring
FAQ
Common questions
What’s the difference between your wiring and “standard” wiring?
Many electricians use each outlet to pass power along to the next one. If one outlet fails, everything after it can go dead. We pigtail the connections in each box instead, so power doesn’t depend on the device. If one outlet fails, the rest of the circuit keeps working.
Do you wire basement developments and renovations?
Yes. We plan the circuits, lighting and outlets with you, pull the permit, rough in before drywall, and come back to finish once walls and cabinets are in.
Can you replace knob and tube or aluminum wiring?
Yes. We replace knob and tube wiring in older homes, often room by room, and repair or update aluminum wiring with the right connectors and devices. Insurers often ask for this before they’ll cover an older home.
Will I need a panel upgrade for an EV charger or hot tub?
Sometimes. It depends on your panel and what’s already on it. We check before we start, and if you need more capacity we can do the panel upgrade as part of the same job.
Do you pull permits for wiring work?
Yes. We pull the electrical permit for work that needs one and make sure it’s done to code.
Are estimates free?
Yes. We can usually give you a ballpark the same day. A full written quote on paper takes about a week.
Get in touch
Tell us about your project
Big job or small, send us a few details. We call back within 2 hours on weekdays, and estimates are free.
- Call or text(306) 361-7625
- Office hoursMon – Fri, 8 a.m. – 5 p.m.
What happens next
- We call you back within 2 hours on weekdays.
- We talk it through, then visit or do a video walkthrough.
- You get a free ballpark estimate, usually the same day.
- We book the work, handle the permits and get it done.